D type Micro channel refrigeration condensing unit in factory price

Cold room

The D type air chiller can be made  into  integrated one or seperatly one like the pictures. which is widely used for the freeze and cold industry.

FUOOL MICROCHANNEL ALUMINUM CONDENSER is with the following characters:

The reliability, corrosion resistance, low electrical power consumption, reduction of refrigerant charge,  low air side pressure drop, modular design, easy maintenance and cleaning, together with the compactness, and the lightweight, allow the reduction of overall costs with almost 100% recyclability.

FOR ALL REFRIGERANTS 
The Fucool microchannel condensers are the best choice for all standard refrigerants up to 
a maximum pressure of 40 bar. In order to ensure the best reliability, regular burst tests 
are carried out at more than 100 bar.

CORROSION RESISTANCE
For normal ambient and usage conditions, the fucool microchannel condenser alloys 
are perfectly suited and the protective function of the oxide layer allows a very good 
corrosion resistance in aggressive ambient conditions too. The use of aluminium is not 
recommended only where chlorides occur in high concentration.

LIGHTNESS

Fucool microchannel condenser are wholy aluminium made. That is why they are 50% 
lighter than conventional fin-tube heat exchangers.

SIMPLE CLEANING
Regular cleaning is due but the Fucool microchannel  high strength and the low coil depth

allow you to easily clean them with normal water pressure or with a high-pressure cleaner.

LOW REFRIGERANT VOLUME
In relation to their performance, the Fucool microchannel condenser require up to 75% less 
refrigerant than conventional heat exchangers. Leak tests are carried out in relation to the volume of refrigerant in the system, so a lower volume can mean fewer leak tests.